Cladding
Measures 1670mm x 850mm x 2150mm approx.
16 Jet Whirlpool and Air Spa System
Monsoon rain top stainless steel rain shower
Polished Chrome Hand Shower on Riser Rail
6 Designer Polished Chrome Adjustable Body Jets
2.8KW Fast Start Steam Generator
1 HP whirlpool pump
Underwater Lighting – 7 Changing Colours
Black Glass
Flow rate of 12/14 litres per minute minimum required
Ensure Balanced Hot & Cold water is supplied to shower unit
Operates at Pressures of 1.8 – 3.5 Bar
This shower requires 2 x 13amp electrical supplies (Whirlpool Pump and Air Blower Pumps and the steam generator ). It comes with a plug and RCD fitted, however we recommend you remove the plug and have the cabin installed to a IP56 fused spur. If you have an RCD fitted within your main board you should also remove the RCD fitted to the shower flex, this is mainly for testing purposes prior to completing the installation.
The cabin requires 1 x hot and 1 x cold water supply. The household water pipes should be fed to a point approximately 1 metre off the floor in the corner where the cabin is to be fitted. Balanced water pressure is required, between 1.5-3 bar. If using a gravity fed tank system we recommend you use a shower pump, to provide the required water pressures.